ApparelX is a global B2B marketplace for fabrics and apparel materials.

Your card is now charged when your order ships Details

New: choose your delivery company at checkout Details

Welcome to ApparelX. Yes, we now ship to the USA!

›
PM33

PM33

Inbell Series Fusible Interlining (Tape), Medium-Hard Type

ApparelX ID:1020955

There are no reviews yet.

This is a tape-type fusible interlining used for waistbands, etc.
The firmness is medium-hard.
It can also be used for uniforms.

Brand / Manufacturer:Manberu

Supplier:Okura Shoji Co., Ltd.

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Item

Size

Please select a size:

25mm

30mm

35mm

40mm

Color

Please select a color:

Black

Bleached White

Order Memo

Add a note for the supplier or for your own reference:

Enter Memo

Item Description

This is a tape-type fusible interlining used for waistbands, etc.
The firmness is medium-hard.
It can also be used for uniforms.

Standard fusing conditions
Dry heat

Temperature	140°C–150°C
Time	10–15 sec
Pressure	2.5~3.0Mpa

*Optimal conditions may vary depending on the outer fabric, weave, etc., so when using, please perform a fusing test on a piece of the same fabric and check thoroughly.

Washable specification

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Unisex
Intended Use	Medium-weight Apparel
Style	For Uniforms/Workwear, For Pants, For Skirts And Dresses


Specification	1 roll 50m
Material	100% polyester E
Brand / Manufacturer	Manberu
Listed on ApparelX	12/2/2024

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament)* and refers to the weight per 9,000 m. If 9,000 m weighs 1 g, that is 1 denier; if it weighs 50 g, that is 50 denier.
The higher the denier count, the thicker the yarn and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer fabric. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

General Notes

Please confirm the following general notes regarding items at this site:

Zippers | Payment When Delivery Time Is Prioritized

We may shorten a longer zipper to the length you need. In that case, the unit price may change.

*** For bank transfers, please pay after the unit price is confirmed.

*** For credit card payments, please make an additional payment after the unit price is confirmed.

About Item Images

Screens cannot reproduce the actual texture or sheen of fabrics and other items, and colors may look slightly different depending on your monitor. We are working toward a world where physical sample books are no longer needed, but for bulk production orders we recommend purchasing a sample book to check the actual item.

Payment for Full-Roll Fabric Orders

The exact length of a full fabric roll may vary. We will notify you once the final length is confirmed.

*** For bank transfers, please pay after the final length is confirmed.

*** For credit card payments, we charge the confirmed length after the final length is confirmed (if it increases, we will ask for an additional payment; for payment methods charged when you place the order, we refund the difference if it decreases).

PM33 Inbell Series Fusible Interlining (Tape), Medium-Hard Type

Unit

Size

Color

Extension Key

Stock Status

Order Memo

Option

Item Description

FAQ

General Notes

Reviews

Related Items

Items with Similar Photos

Fabrics with a similar hand feelAI

Customers Who Viewed This Item Also Viewed

Items from the same category

More from This Brand or Manufacturer

PM33

Inbell Series Fusible Interlining (Tape), Medium-Hard Type