ApparelX is a global B2B marketplace for fabrics and apparel materials.

Welcome to ApparelX. Yes, we now ship to the USA!

›
MS-1221

MS-1221 Water-soluble Interlining For Shirts[Interfacing] KARANINGYO

MS-1221

Water-soluble Interlining For Shirts

ApparelX ID:1076793

non fusible interlining 1221 is a temporary fusible interlining with completely water-soluble adhesive resin applied to it. When washed with water during laundering or garment washing, the resin washes away, leaving it as non fusible interlining. Because it is handled in the same way as fusible interlining, it supports sewing.

Brand / Manufacturer:KARANINGYO

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Color

Please select a color:

Off White

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

Pressing conditions
・Flat type

Temperature	140~150℃
Time	12〜15 seconds
Pressure	2.45〜3.43 x 10-²MPa

・Roller type

Temperature	140℃〜150℃
Time	12〜15 seconds
Pressure	0.245〜0.343MPa

*Pressing conditions vary depending on the pressing machine, so we recommend test bonding each time

Bath ratio for dissolving the water-soluble resin: "1:30" (30 L of water is required per 1 kg of product. Be sure to rinse as well.)

Category	Interfacing
Subcategory	Shirt Interlining
Gender	Men's
Intended Use	Shirt Collar And Cuffs
Weave	Plain Weave


Specification	90 cm × 60 m
Material	65% polyester, 35% cotton E CO
Handling	For dissolving the water-soluble resin, the bath ratio is "1:30" (30 L of water is required per 1 kg of product. Also, be sure to rinse thoroughly.
Brand / Manufacturer	KARANINGYO

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament fiber)*, indicating the weight per 9,000 m. If 9,000 m weighs 1 g, it is 1 denier; if it weighs 50 g, it is 50 denier.
The higher the denier count, the thicker the thread and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

MS-1221 Water-soluble Interlining For Shirts

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Product Description

FAQ

General Notes

Reviews

Related Items

Customers who viewed this product also viewed

Items from the same category

More from This Brand or Manufacturer

MS-1221

Water-soluble Interlining For Shirts