ApparelX is a global B2B marketplace for fabrics and apparel materials.

Your card is now charged when your order ships Details

New: choose your delivery company at checkout Details

Welcome to ApparelX. Yes, we now ship to the USA!

›
KW016

KW016 Thermofix® Interlining For Lightweight Fabrics[Interfacing] Tohkai Thermo(Thermo)

KW016

Thermofix® Interlining For Lightweight Fabrics

ApparelX ID:1077659

There are no reviews yet.

This interlining for lightweight fabrics uses ultra-fine fibers and has an extremely light, soft hand.
※When ordering by roll, enter 60 for the quantity.

Set roll quantity

※1 roll is 60 m random length. We will inform you of the actual meterage at the time of shipment.

Brand / Manufacturer:Tohkai Thermo(Thermo)

Supplier:Okura Shoji Co., Ltd.

Color:Please select

Option:Cutting Fee (59M Or Less)

Stock Status(*):Displayed after account registration

Per Meter(M)

＋Cutting Fee (59M Or Less)Per Times(P)

Qty.

Ask About This Item

Color

Please select a color:

Black

Order Memo

Add a note for the supplier or for your own reference:

Enter Memo

Option

You can select options below:

Cutting Fee (59M Or Less)

This option cannot be removed

This is the cutting fee. It applies when the length is 59M or less.

Per Times(P)

Enter Memo

Item Description

This interlining for lightweight fabrics uses ultra-fine fibers and has an extremely light, soft hand.
※When ordering by roll, enter 60 for the quantity.

Set roll quantity

※1 roll is 60 m random length. We will inform you of the actual meterage at the time of shipment.

Pressing conditions
・Flat type

Temperature	125 - 145℃
Time	10 - 15 sec
Pressure	15 - 29 (kpa)

・Roller type

Temperature	125 - 145℃
Time	10 - 15 sec
Pressure	3.9 - 11.8(N/cm)

*Pressing conditions vary depending on the press machine, so we recommend trial application each time

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Women's
Intended Use	General Purpose
Weave	Plain Weave
Style	For Shirts/blouses


Specification	Width: 122cm x 60m Count: 18dtex x 18dtex Coating: DP40P Color variation: Y / 40
Material	100% polyester E
Width	122 cm (≈ 48 in)
Hand feelAI	SurfaceCoated AI estimate from the product video and data. The actual fabric may differ.
Handling	Please confirm the appropriate bonding conditions using the same fabric before actual bonding.
Brand / Manufacturer	Tohkai Thermo(Thermo)
Listed on ApparelX	3/7/2023

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament)* and refers to the weight per 9,000 m. If 9,000 m weighs 1 g, that is 1 denier; if it weighs 50 g, that is 50 denier.
The higher the denier count, the thicker the yarn and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer fabric. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

General Notes

Please confirm the following general notes regarding items at this site:

Zippers | Payment When Delivery Time Is Prioritized

We may shorten a longer zipper to the length you need. In that case, the unit price may change.

*** For bank transfers, please pay after the unit price is confirmed.

*** For credit card payments, please make an additional payment after the unit price is confirmed.

About Item Images

Screens cannot reproduce the actual texture or sheen of fabrics and other items, and colors may look slightly different depending on your monitor. We are working toward a world where physical sample books are no longer needed, but for bulk production orders we recommend purchasing a sample book to check the actual item.

Payment for Full-Roll Fabric Orders

The exact length of a full fabric roll may vary. We will notify you once the final length is confirmed.

*** For bank transfers, please pay after the final length is confirmed.

*** For credit card payments, we charge the confirmed length after the final length is confirmed (if it increases, we will ask for an additional payment; for payment methods charged when you place the order, we refund the difference if it decreases).

Need help? Visit our Support page