ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

Welcome to ApparelX. Yes, we now ship to the USA!

›
8023

8023 Soft Metallic[Ribbons, Tapes, And Cords] Telala (Inoue Ribbon Industries)

8023

Soft Metallic

ApparelX ID:1092888

There are no reviews yet.

Purchases by the meter are limited to 9 m.

For orders by R, the per-meter equivalent unit price is half.

This ribbon is made of nylon/polyester lame material.
This soft metallic ribbon is recommended for shirts and dresses.

Brand / Manufacturer:Telala (Inoue Ribbon Industries)

Supplier:Okura Shoji Co., Ltd.

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Product

Unit

* You can select a unit:

Meter

Roll

Size

Please select a size:

12mm

18mm

24mm

36mm

Color

Please select a color:

GOLD

SILBER

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

SAMPLE-800

Sample Card

Product Description

Purchases by the meter are limited to 9 m.

For orders by R, the per-meter equivalent unit price is half.

This ribbon is made of nylon/polyester lame material.
This soft metallic ribbon is recommended for shirts and dresses.

Category	Ribbons, Tapes, And Cords
Subcategory	Ribbon
Gender	Unisex
Application	General Purpose
Style	For Bags, For Costumes/dresses, For Innerwear, For Pants, For Shirts/blouses, For Skirts And Dresses


Specification	Specification: 1 roll 30 m Size: 12mm/18mm/24mm/36mm
Material	【12mm】N:67% PL:33% 【18mm】N:68.5% PL:31.5% 【24mm】N:70% PL:30% 【36mm】N:70.5% PL:29.5% E PA
Brand / Manufacturer	Telala (Inoue Ribbon Industries)
Registration Date	5/10/2024

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.