ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

Welcome to ApparelX. Yes, we now ship to the USA!

›
M-8912-BT

M-8912-BT

M-8912 Scotchlite BT (Flat Bias Tape)

Name: M-8912 Scotchlite BT (Flat Bias Tape)
Brand: STAR BRAND (Hoshika)
SKU: 1097284

ApparelX ID:1097284

This product has been processed into bias tape.
It is a sewing-type retroreflective fabric that uses TC material for the base fabric and has fine glass beads coated on the surface.
It helps improve safety for uniforms worn by workers at night and in other hazardous situations.
It can be used for a wide range of applications, from casual wear to uniforms, thanks to cut tape and piping processing.

This product can be ordered by roll. (1 roll = 35M estimated)

Set roll quantity

Because this product is wound in 35M estimated rolls, if the meterage is less, we will refund the amount corresponding to that quantity. If it is more, we will charge for the shortage. In that case, we will contact you separately.

Brand / Manufacturer:STAR BRAND (Hoshika)

Supplier:

Size:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Size

Please select a size:

10MM

11MM

12MM

13MM

14MM

15MM

16MM

17MM

18MM

19MM

20MM

21MM

22MM

23MM

24MM

25MM

26MM

27MM

28MM

29MM

30MM

31MM

32MM

33MM

34MM

35MM

36MM

37MM

38MM

39MM

40MM

41MM

42MM

43MM

44MM

45MM

46MM

47MM

48MM

49MM

50MM

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

STARBRAND-SAMPLE1

STAR BRAND Sample Card

Product Description

Set roll quantity

Category	Ribbons, Tapes, And Cords
Subcategory	Tape
Gender	Unisex
Style	FUNCTIONAL, OUTDOOR, UNIFORM, OUTER


Country of Origin	United States
Specification	1 roll: 35m estimated Reflective brightness: 500cd/lux/m2 (Representative value at observation angle 0.2° and incident angle +5°; not a guaranteed value.)
Material	Base fabric: 65% polyester, 35% cotton Surface: glass beads E CO
Brand / Manufacturer	STAR BRAND (Hoshika)

Share This Item

FAQ

Frequently asked questions about this product:

Can tassel finishing be applied to cords?

Tassel finishing is possible using cords. It can be done simply by untying the cord, or by attaching a separate thin cord to the cord end. Since this is manual processing, a separate quote is required. Please contact us via the support page for details.

・Product number
・An image of the desired look, or an image showing the length, etc., if handwritten
・Planned quantity

What materials can be heat cut?

For synthetic fibers (polyester, nylon, acrylic, polypropylene, etc.), heat cutting is possible.
For natural fibers (cotton, linen, silk, etc.), heat cutting cannot be used because they will burn or char, so only scissors cutting is possible.
Even with synthetic fibers, extra-thick twist cord may not fuse properly, so please be careful.

Is logo printing possible?

Printing is possible depending on the material.
For details, please contact us here.

Is it possible to specify an angled cut edge for heat cutting?

Angled cutting is possible, but since it is done by hand, there may be a deviation of a few degrees.
Please specify 45° diagonally, etc. when placing your order.

What do 7×7 mm and 9×9 mm mean in the width notation for binder tape and knit tape?

This width specification has a groove in the center and is used by sandwiching textile, etc.
In the case of 7×7 mm, it becomes 7 mm when folded in half.

Is it possible to have tape or cord cut one by one to the specified length?

Yes, that is possible. Please select either scissor cutting or heat cutting from the options on each product page and enter the quantity.
Please write your desired length in the notes section at that time.
Since cutting always results in some cutting loss, if the number of cuts is large, it may not be possible to cut all of them from the number of rolls you ordered.
In that case, our order staff will contact you to confirm whether to cut as much as possible from the number of rolls ordered or to add more quantity.