M-1720-WT

M-1720 Microprism Roll Shooting Welded Tape (Circular Interlock Knitting)

ApparelX ID:1097539

This is a product that has been welder processed.
When used outdoors, even if rain or other moisture adheres to the surface, the smooth, flat surface is covered with a roll-reflecting layer, so light sources refracted by water can still be roll-reflected.
This product can be ordered by the roll. (1 roll = 60 meters random)

Set the number of rolls

!

The product is 60 meters randomly wound, so if the number of meters is less, we will refund the amount. If the number of meters is more, we will charge you for the shortfall. In that case, we will contact you separately.

Maker:STAR BRAND (Hoshika)

Supplier:

PVC

Size:Please select Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Size

Please select a size:

15MM

25MM

35MM

50MM

70MM

Color

Please select a color:

1

White

2

Fluorescent Lime Yellow

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Order Sample Book

You can order the sample book here:

*Note: Sample Book Item to be added to your cart, so if you want to cancel it, please remove it from your cart. The information to be set in the remarks.

SAMPLE

Sample Card

Item Description

This is a product that has been welder processed.
When used outdoors, even if rain or other moisture adheres to the surface, the smooth, flat surface is covered with a roll-reflecting layer, so light sources refracted by water can still be roll-reflected.
This product can be ordered by the roll. (1 roll = 60 meters random)

Set the number of rolls

!

The product is 60 meters randomly wound, so if the number of meters is less, we will refund the amount. If the number of meters is more, we will charge you for the shortfall. In that case, we will contact you separately.

*Fluorescent colors may transfer if in direct contact.
*Even with normal colors, there is a risk of color transfer from the material depending on the combination.
*Please be careful when combining with other auxiliary materials.
*There are mold lines on the surface of the sheet at intervals of approximately 230 mm in the roll direction.
*Do not dry clean, do not wash at home, do not iron

Category	Ribbon Tape Cord
Subcategory	Tape
Gender	Unisex
Material	Vinyl Chloride
Style	FUNCTIONAL, OUTDOOR, UNIFORM, OUTER
Tag	NEW


Country of Origin	United States
Specification	1roll: 60m estimated Roll Radiance: C/#1 200cd/lux/m2 C/#2 145cd/lux/m2 (These are typical values for observation angle 0.2° and incidence angle +5°, and are not guaranteed values.)
Material	Soft vinyl chloride 100% PVC
Maker	STAR BRAND (Hoshika)

Share This Item

FAQ

Regarding this item, there are the following FAQ:

Is it possible to specify an oblique cut for the heat cut?

Diagonal cuts are also possible, but as this is done by hand, there may be a slight deviation of a few degrees.
When ordering, please specify an angle such as 45°.

What materials can be heat cut?

Heat cutting is possible for synthetic fibers (polyester, nylon, acrylic, polypropylene), etc.
Natural fibers (cotton, linen, silk, etc.) can burn or burn, so they cannot be cut with heat, and can only be cut with scissors.
Please note that thick twisted cord may not harden well even if they are synthetic fibers.

Is logo printing possible?

You can print on the material.
For details, please contact us from here .

What do the widths of 7x7mm and 9x9mm mean for binder tapes and knit tapes?

The one with this width has a groove in the center and is used by sandwiching the textile.
In the case of 7 x 7 mm, it will be 7 mm when folded in half.

Is it possible to add tassel to the cord ?

tassel processing is possible with strings. You can simply untie it, or you can attach another thin string to the end of the string. Since it will be hand-made, it will be a separate estimate. For details, please contact us from the support page .

<necessary information>
・Product number ・Image image or image that shows the length of handwriting ・Planned quantity

Is it possible to have the tapes and cord cut to the specified length one by one?

Is possible. Please select scissors cut or heat cut from the options on each product page and enter the quantity.
At that time, please write down the desired length in a memo.
During the cut, for sure it is Kattorosu occurs, there is a case when the number of cut often is not completely removed from the roll to receive your order.
In that case, we will contact you than order the person in charge to check whether to add a TorikiRika or quantity, from the roll receive the order.