ApparelX is B2B e-commerce site for the apparel industry.

Welcome to ApparelX. Yes, we now ship to the USA!

›
R5005

R5005 Fading Compatible With Thin Water-repellent Coating Materials High Adhesion & Resin Anti-strike/glit[Interlining] Nittobo

R5005

Fading Compatible With Thin Water-repellent Coating Materials High Adhesion & Resin Anti-strike/glit

ApparelX ID:1021384

We use Nittobo's original special resin that provides high adhesive strength even to difficult-to-adhere water-repellent coated materials.
The use of SDDC technology and special resins makes it extremely effective at preventing resin fading and bleeding. It is also recommended for thin, difficult-to-adhere materials such as linings.
Available in a wide range of colors.
Soft Standard Type
SDDC is a Nittobo technology that uses ultrafine particles for high-performance adhesives. By using fine resin, it prevents bleeding, resin fading, and glare even on thin surfaces, and achieves high adhesive strength.

Maker:Nittobo

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Color

Please select a color:

121

122

267

879

White

Off

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Order Sample Book

You can order the sample book here:

*Note: Sample Book Item to be added to your cart, so if you want to cancel it, please remove it from your cart. The information to be set in the remarks.

SAMPLE

Sample Card

Item Description

Press conditions ・ Flat type

temperature	130-150 ℃
time	10 to 15 seconds
pressure	2.0-3.0x10-²MPa (0.2-0.3kgf / cm²)

・ Roller type

temperature	120 ℃ ～ 140 ℃
time	10-12 seconds
pressure	0.15-0.3MPa (1.5-3.0kgf / cm²)

* Press conditions vary depending on the press model, so it is recommended to try and paste each time.

Part number

Product name

Danrene Thin water-repellent coated material compatible High adhesion & resin fading and glare prevention SDDC interlining 20D

Danrene, for thin water-repellent coated materials, SDDC interlining to prevent resin fading, Soft Standard 20D

Danrene Low temperature adhesion, shape memory, suitable for hard-to-adhere materials, fading resistant SDDC interlining 20D

Low-temperature adhesion, shape memory, and suitable for hard-to-adhere materials. SDDC interlining prevents resin fading.

Danrene Low-temperature adhesive stretch interlining, soft type, 20D

Danrene Low-temperature adhesive stretch interlining, sharp type, 30D

Thumbnail

Texture

Thin, light and soft

Soft Standard

Thin Natural

Natural Hard

Thin and soft

Standard

Items Used

Blouses, jackets, coats, etc.

Blouses, jackets, coats, and other light to heavy clothing

Blo

Water-repellent coated interlining for thin materials

Part number	R5001	R5005	R5115	R5015
Product name	SDDC series Water-repellent/coated material compatible interlining	Danrene Thin water-repellent coated material compatible High adhesion & resin fading and glare prevention SDDC interlining 20D	SDDC Series Water-repellent/coated material compatible interlining	SDDC Series Water-repellent/coated material compatible interlining ApparelX ID:1021386
Thumbnail
Texture	Ultra-thin, lightweight, thin type	Soft Standard Type	Nylon material, curl type, transparent soft	Natural hard type
material	100% polyester	100% polyester	100% nylon	100% polyester
Items Used	Blouses, jackets, coats, etc.	Blouses, jackets, coats, etc.	Blouses, jackets, coats, etc.	Blouses, jackets, coats, etc.
Suitable surface material	Thin to thick / Natural to synthetic / Water-repellent coating material	Thin to thick / Natural to synthetic / Water-repellent coating material	Thin to thick / Natural to synthetic / Water-repellent coating material	Thin to thick / Natural to synthetic / Water-repellent coating material
Hardness	soft	Moderate	Moderate	hard
Thickness	11D	20D	15D	30D
Color variations	11	14	11	11
standard	112cm x 50m	112cm x 50m	92cm×50m	112cm x 50m

*You can scroll horizontally.

*The above information is for reference only. Please check the actual product before use.

Category	Interlining
Subcategory	Fusible Interlining
Gender	Women
Use Applications	General Purpose
Material	Polyester
Organization	Taffeta
Color Pattern	No Pattern
Style	DRESS, FUNCTIONAL, JACKET, OUTDOOR, OUTER, PANT, SHIRT, SKIRT, SUSTAINABLE, UNIFORM


Specification	Standard: 112 cm x 50 meters
Material	100% polyester% E
Handling	Suitable material: Thin-thick natural-synthetic fiber water-repellent coating material taffeta, lining, etc.
Maker	Nittobo

Share This Item

FAQ

Regarding this item, there are the following FAQ:

What kind of trouble is glitter?

This is a phenomenon in which the resin can be seen glittering through the gaps in the surface material.
Low-density materials and dark-colored thin fabrics tend to stand out, so using colored resin can solve this problem.

What kind of trouble is Shimidashi?

The adhesive resin oozes out into the outer textile, which spoils the texture.
As a solution, choose a small shape adhesive resin.

What kind of trouble is fading?

The unevenness of the resin grains clearly appears on the surface of the outer textile. The solution is to choose a smaller resin interlining.

What does the D (denier) in 20D and 30D mean?

Denier is a unit used for filament thread(continuous long fiber)* and refers to the weight per 9000m. 1g at 9000m is 1 denier, and 50g is 50 denier.
The higher the denier, the thicker the thread and the thicker the fabric.

What is the difference between white, such as KW, fusible interlining, W, and Y, in the color of the fusible interfacing?

The color notation differs depending on the product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is more pure white.

What kind of trouble is bubbling?

It looks like there are fine air bubbles between the outer textile and the interlining. The textile and the interlining are incompatible, so it is placed. If you choose a vertical or horizontal stretch interlining, it may be eliminated.

What is the difference between single-dot and double-dot fusible interlining interfacing?

The difference is the coating method of the adhesive.
A single dot is made by solidifying a fine powder adhesive and transferring it to the base fabric (base fabric) in dots.
Since the adhesive is fine, it does not fading out even on thin materials, and it is difficult to get hits.
Double Dot has a two-layer structure in which a gel-like adhesive is used as the base, and powdered adhesive is piled up on top of it.
High adhesive strength can be obtained for a wide range of materials.

How do I choose an interlining?

The interlining varies depending on the outer material, thickness, and location of use, so it is not possible to generalize.
Please let us know the material of the outer material, the parts to be used (neckline, body, etc.) and the desired texture from the inquiry form.

Also, if you provide the outer material, we can conduct an adhesion test. Please request from interlining adhesion test .
By performing an adhesion test, you can know in advance the adhesion strength and changes in appearance.

Is it possible to ship the interlining in a bar roll?

Basically, if it is 5m or more, we will ship it by wrapping it around a stick.