ApparelX is a global B2B marketplace for fabrics and apparel materials.

Add or change items after you order Details

New: material suggestions from a garment photo Details

Change your order’s shipping address, even abroad Details

Product search upgraded: now also finds similar meanings and spelling variants Details

Welcome to ApparelX. Yes, we now ship to the USA!

›
NSW600

NSW600 Water-soluble Resin Interfacing For Garment Dyeing And Washing, Semi-hard Type 45/ Nittobo Advantex

NSW600

Water-soluble Resin Interfacing For Garment Dyeing And Washing, Semi-hard Type 45/

ApparelX ID:1020007

There are no reviews yet.

With a moderate amount of body and crispness, it can be used in a wide range of applications such as shirt collars, facings, and cuffs.
Because it uses a water-soluble adhesive resin, it bonds during the sewing stage, but when washed with water it becomes a non fusible interlining, giving a comfortable, well-adapted texture that cannot be achieved with fusible interlining.
By using a dot-type resin structure, it is less likely to feel sticky than conventional sinter-type products and offers excellent handling.
This is a semi-hard type that is thicker than NSW300.
As soon as NSW600 is out of stock, it will be replaced with the new product number NSW600A. Thank you for your understanding.

Brand / Manufacturer:Nittobo Advantex

Supplier:Okura Shoji Co., Ltd.

Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Item

Color

Please select a color:

Black

Stock Status

Stock levels change frequently. Contact us if you need confirmed availability.
Products shipped from the brand or manufacturer's warehouse may require additional delivery time.
If an item is found to be out of stock after you place your order, we will cancel the order and issue a refund.

Combine stock from multiple locations

Color	Stock Location	Available Quantity
30 Black	Own warehouse	6m≈ 6.56 yd
Y	Own warehouse	53m≈ 57.96 yd

*Last updated:Oct 22, 2026, 10:13 PM

Order Memo

Add a note for the supplier or for your own reference:

Enter Memo

Order Sample Book

Order a sample book here:

*Note: The sample book below will be added to your cart. If you do not need it, remove it on the Cart page. Its memo is pre-filled with the item code and name from this page.

NSWSAMPLE

Sample Card

Item Description

Pressing conditions
・Flat type

Temperature	120~135℃
Time	10〜15 seconds
Pressure	2.0~3.0×10- ² MPa(0.2〜0.3kgf/cm²)

・Roller type

Temperature	120〜135℃
Time	10〜12 seconds
Pressure	0.15~0.3MPa(1.5〜3.0kgf/cm²)

* Pressing conditions vary depending on the press machine, so we recommend test pressing each time.

・In humid environments, the adhesive may become tacky. Store away from hot, humid places.
・When cutting, perform one-way roll spreading.
・When using, apply stitching, locking, or other interlining securing treatment.
・Do not dry clean while the adhesive is still bonded.
・When piece dyeing or washing is performed, first dissolve the resin in water at 40°C or below, then carry out the draining and rinsing steps.

product number	ONW30	ONW50	BW810	BW820	BW870	BW890	NSW30	NSW100	NSW190W	NSW300	NSW600
product name	High-durability interfacing for garment bio-wash (30D)	High-durability interfacing for garment bio-wash (50D)	Water-based wash-durable interfacing for garment wash processing (15D)	Water-based wash-durable interfacing for garment wash processing (30D)	Water-based wash-durable interfacing for garment wash processing (30D)	Water-based wash-durable interfacing for garment wash processing (30D)	Water-soluble resin interfacing for garment dyeing and garment washing, stretch yarn type	Water-soluble resin interfacing for garment dyeing and garment washing, soft type 40/	Water-soluble resin interfacing for garment dyeing and garment washing, standard type 45/	Water-soluble resin interfacing for garment dyeing and garment washing, hard type	Water-soluble resin interfacing for garment dyeing and garment washing, semi-hard type 45/
thumbnail
thinness order	2	3	1	2	2	2	2	3	3	5	4
type	High-durability fully fusible type	High-durability fully fusible type	High-durability fully fusible type	High-durability fully fusible type	High-durability fully fusible type	High-durability fully fusible type	Water-soluble type/stretch	Water-soluble type/soft	Water-soluble type/standard	Water-soluble type/hard	Water-soluble type/semi-hard
intended use	Jackets, blousons, coats	Jackets, blousons, coats	Blousons, jackets, coats, pant fronts, facings, parts	Blousons, jackets, coats, pant fronts, facings, parts	Blousons, jackets, coats, pant fronts, facings, parts	Blousons, jackets, coats, pant fronts, facings, parts	General garment wash processing, shirts, etc.	General garment wash processing, shirts, etc.	General garment wash processing, shirts, etc.	General garment wash processing, shirts, etc.	General garment wash processing, shirts, etc.
compatible materials	Natural materials to blended and synthetic materials	Natural materials to blended and synthetic materials	Natural materials to blended and synthetic materials	Natural materials to blended and synthetic materials	Natural materials to blended and synthetic materials	Natural materials to blended and synthetic materials	Natural to blended materials	Natural to blended materials	Natural to blended materials	Natural to blended materials	Natural to blended materials

* Horizontal scrolling is available.

* The above information is for reference only. Please check the actual product before use.

Category	Interfacing
Subcategory	Fusible Interlining
Gender	Unisex
Intended Use	General Purpose
Style	For Shirts/blouses, For Uniforms/Workwear


Specification	112 cm wide × 60 m
Material	polyester:65% cotton:35% E CO
Width	112 cm (≈ 44 in)
Hand feelAI	StretchSome stretch Drape / CrispCrisp AI estimate from the product video and data. The actual fabric may differ.
Brand / Manufacturer	Nittobo Advantex
Listed on ApparelX	5/30/2018

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament)* and refers to the weight per 9,000 m. If 9,000 m weighs 1 g, that is 1 denier; if it weighs 50 g, that is 50 denier.
The higher the denier count, the thicker the yarn and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer fabric. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.

General Notes

Please confirm the following general notes regarding items at this site:

Zippers | Payment When Delivery Time Is Prioritized

We may shorten a longer zipper to the length you need. In that case, the unit price may change.

*** For bank transfers, please pay after the unit price is confirmed.

*** For credit card payments, please make an additional payment after the unit price is confirmed.

About Item Images

Screens cannot reproduce the actual texture or sheen of fabrics and other items, and colors may look slightly different depending on your monitor. We are working toward a world where physical sample books are no longer needed, but for bulk production orders we recommend purchasing a sample book to check the actual item.

Payment for Full-Roll Fabric Orders

The exact length of a full fabric roll may vary. We will notify you once the final length is confirmed.

*** For bank transfers, please pay after the final length is confirmed.

*** For credit card payments, we will refund the difference or ask for an additional payment after the final length is confirmed.

Need help? Visit our Support page