ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

Welcome to ApparelX. Yes, we now ship to the USA!

›
IF7163

IF7163 Lining And Interlining Use, New Material, Chambrace Standard Type (Lightweight)[Interfacing] Nittobo Advantex

IF7163

Lining And Interlining Use, New Material, Chambrace Standard Type (Lightweight)

ApparelX ID:1068811

This is a new chambray-type material that can be used as both lining and interlining, and is designed so the reverse side can also be shown. By using special yarns and a different-color warp and weft, it achieves a complex, distinctive color tone and sheen through the chambray effect. It easily adds a decorative touch to standard outer fabrics. Thanks to Nittobo’s special technology, it is a material that makes single-layer construction possible. By simply fusing it to your chosen outer fabric with a press machine, this new auxiliary material can provide the functions of fusible interlining, such as shape retention, improved sewability, and added form stability, while also adding lining functions such as improved comfort and reinforcement of the outer fabric. In addition, when making bonded materials, fabric preparation and the bonding process are normally required, but because bonding can be done at the sewing factory, improved productivity can be expected. Since single-layer construction is possible, shorter pattern-making and sewing processes can also be expected.
* Colors other than the standard colors are made to order and sold from 500 m, so please note.

* If ordering by the roll, please enter 50 for the quantity.

Set the quantity for a roll

Brand / Manufacturer:Nittobo Advantex

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Unit

* You can select a unit:

Made To Order

Color

Please select a color:

BGR4

BPN1

BY1

BY10

BY11

BY12

BY13

BY14

BY15

BY2

BY3

BY4

BY5

BY6

BY7

BY8

BY9

PBE3

PGR2

ZERO

White

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Order Sample Book

Order a sample book here:

*Note: Sample Book Item will be added to your cart. Remove it from your cart if you do not need it. Your order notes will also be applied to the sample book.

IF7163/IF7163D

Sample Card

Product Description

Set the quantity for a roll

Pressing conditions
・Flat type

Temperature	130~150℃
Time	12〜15 sec
Pressure	2.0〜3.0x10-²MPa

・Roller type

Temperature	120℃〜140℃
Time	10〜15 sec
Pressure	0.2〜0.3MPa(10.0〜25.0N/cm)

* Pressing conditions vary depending on the press machine, so we recommend performing a test bond each time.

Category	Interfacing
Subcategory	Fusible Interlining
Intended Use	General Purpose
Weave	Taffeta
Color / Pattern	Solid
Style	JACKET, OUTER, PANT, SKIRT


Specification	Specification: 135cmx50m Yarn count: 30dtex x 33dtex Bonding points: W26P
Material	100% polyester E
Handling	- The slippage and pilling condition on the Innovative Fabric side may vary depending on compatibility with the outer fabric. Please confirm sufficiently through adhesion testing and wear testing, and then consider the specifications in light of your customer quality standards. - Because soft processed yarn is used, if strong force is applied to the seams, stitch opening and stitch slippage may become noticeable. - Because of the special dyeing method, slight color differences may occur. We recommend use from the same lot and cutting in one direction within a garment.
Brand / Manufacturer	Nittobo Advantex

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament)* and refers to the weight per 9,000 m. If 9,000 m weighs 1 g, that is 1 denier; if it weighs 50 g, that is 50 denier.
The higher the denier count, the thicker the yarn and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

Can interfacing be shipped rolled on a tube?

Basically, orders of 5 m or more will be shipped wound on a tube.