IF7163D New Material For Both Lining And Interlining Chambray Standard Type Dark Color (Thin) Nittobo

IF7163D

New Material For Both Lining And Interlining Chambray Standard Type Dark Color (Thin)

ApparelX ID:1071605

This is a new chambray-type lining and interlining material that makes you want to show off the back side. The complex and special chambray color and luster are achieved by using special thread and using different colors for the thread and thread. It is easy to add design to standard outer fabrics. This material allows single-layer tailoring using Nittobo's special technology. This new auxiliary material can be attached to your favorite outer fabric with a press machine to add the functions of fusible interlining such as shape stability, increased sewability, and added shape retention, as well as the functions of lining such as improved comfort and reinforcement of the outer fabric. In addition, when making bonding materials, it is necessary to arrange for bonding materials and processes, but since bonding can be done at the sewing factory, it is expected to improve productivity. Since single-layer tailoring is possible, it is expected that the pattern creation and sewing processes will be shortened.

*If ordering by roll, please enter 50 in the quantity field.

Set the number of rolls

Maker:Nittobo

Supplier:

E

Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Color

Please select a color:

BBL7

Black

BNA8

Navy Blue

BOR6

Red

BWH5

Gray

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Order Sample Book

You can order the sample book here:

*Note: Sample Book Item to be added to your cart, so if you want to cancel it, please remove it from your cart. The information to be set in the remarks.

SAMPLE

Sample Card

Item Description

This is a new chambray-type lining and interlining material that makes you want to show off the back side. The complex and special chambray color and luster are achieved by using special thread and using different colors for the thread and thread. It is easy to add design to standard outer fabrics. This material allows single-layer tailoring using Nittobo's special technology. This new auxiliary material can be attached to your favorite outer fabric with a press machine to add the functions of fusible interlining such as shape stability, increased sewability, and added shape retention, as well as the functions of lining such as improved comfort and reinforcement of the outer fabric. In addition, when making bonding materials, it is necessary to arrange for bonding materials and processes, but since bonding can be done at the sewing factory, it is expected to improve productivity. Since single-layer tailoring is possible, it is expected that the pattern creation and sewing processes will be shortened.

*If ordering by roll, please enter 50 in the quantity field.

Set the number of rolls

Press conditions ・ Flat type

temperature	130 ~ 150 ℃
time	12 to 15 seconds
pressure	2.0 ~ 3.0x10-²MPa

・ Roller type

temperature	120 ℃ ～ 140 ℃
time	10 to 15 seconds
pressure	0.2 to 0.3 MPa (10.0 to 25.0 N / cm)

* Press conditions vary depending on the press model, so it is recommended to try and paste each time.

Category	Interlining
Subcategory	Fusible Interlining
Use Applications	General Purpose
Material	Polyester
Organization	Taffeta
Color Pattern	No Pattern


Specification	Standard: 135cm x 50 meters Count: 30dtex x 33dtex Adhesion point: W26P
Material	100% polyester% E
Handling	・The slippage and pilling of the innovative fabric surface is expected to change depending on its compatibility with the outer fabric. Please thoroughly check the adhesion test and wearing, and consider the specifications in light of your quality standards. -Because soft processed thread is used, if too much force is applied to the seams, there is a risk of the stitches cracking or becoming misaligned. ・Due to the special dyeing method, subtle color differences may occur. We recommend using the same lot and cutting the inside of the garment one-sided.
Maker	Nittobo

Share This Item

FAQ

Regarding this item, there are the following FAQ:

What kind of trouble is glitter?

This is a phenomenon in which the resin can be seen glittering through the gaps in the surface material.
Low-density materials and dark-colored thin fabrics tend to stand out, so using colored resin can solve this problem.

What kind of trouble is Shimidashi?

The adhesive resin oozes out into the outer textile, which spoils the texture.
As a solution, choose a small shape adhesive resin.

What kind of trouble is fading?

The unevenness of the resin grains clearly appears on the surface of the outer textile. The solution is to choose a smaller resin interlining.

What does the D (denier) in 20D and 30D mean?

Denier is a unit used for filament thread(continuous long fiber)* and refers to the weight per 9000m. 1g at 9000m is 1 denier, and 50g is 50 denier.
The higher the denier, the thicker the thread and the thicker the fabric.

What is the difference between white, such as KW, fusible interlining, W, and Y, in the color of the fusible interfacing?

The color notation differs depending on the product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is more pure white.

What kind of trouble is bubbling?

It looks like there are fine air bubbles between the outer textile and the interlining. The textile and the interlining are incompatible, so it is placed. If you choose a vertical or horizontal stretch interlining, it may be eliminated.

What is the difference between single-dot and double-dot fusible interlining interfacing?

The difference is the coating method of the adhesive.
A single dot is made by solidifying a fine powder adhesive and transferring it to the base fabric (base fabric) in dots.
Since the adhesive is fine, it does not fading out even on thin materials, and it is difficult to get hits.
Double Dot has a two-layer structure in which a gel-like adhesive is used as the base, and powdered adhesive is piled up on top of it.
High adhesive strength can be obtained for a wide range of materials.

How do I choose an interlining?

The interlining varies depending on the outer material, thickness, and location of use, so it is not possible to generalize.
Please let us know the material of the outer material, the parts to be used (neckline, body, etc.) and the desired texture from the inquiry form.

Also, if you provide the outer material, we can conduct an adhesion test. Please request from interlining adhesion test .
By performing an adhesion test, you can know in advance the adhesion strength and changes in appearance.

Is it possible to ship the interlining in a bar roll?

Basically, if it is 5m or more, we will ship it by wrapping it around a stick.