ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

Welcome to ApparelX. Yes, we now ship to the USA!

›
LE306

This item is discontinued.

You can not purchase this item. You can check the successor item information at Description Section or Related Item Section.

LE306 Shirt Belt For Low Elongation Corresponding Fusible Interlining Areas[Interfacing] Vilene (JAPAN Vilene)

LE306

Shirt Belt For Low Elongation Corresponding Fusible Interlining Areas

ApparelX ID:1018421

There are no reviews yet.

Following JAPAN Vilene's withdrawal from sales in Japan, new orders have ended, but customers who continue to use the product and need assistance should contact support. If stock is available, you may be able to place an order.

It is thin, with a moderately crisp hand, and its feature is that it moderately suppresses the stretch of the warp thread and weft thread.
It also has excellent dimensional stability, so it is less likely to wrinkle.

* If ordering by the roll, enter 50 in the quantity field.

Set roll quantity

* An image of the adhesive side is in the third image.
* 50M per roll
* This item is arranged in roll units.

Brand / Manufacturer:Vilene (JAPAN Vilene)

Supplier:Okura Shoji Co., Ltd.

Color:Please select

Stock Status(*):Displayed after account registration

Per Meter(M)

Qty.

Ask About This Product

Color

Please select a color:

BLK

Black

OWH

Off White

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

Set roll quantity

* An image of the adhesive side is in the third image.
* 50M per roll
* This item is arranged in roll units.

Category	Interfacing
Style	For Shirts/blouses, For Pants, For Skirts And Dresses


Specification	Standard: 122 cm x 50 meters Number of points (P / inch): 33 White: OWH Black: BLK
Material	100% polyester% Resin type: Polyamide resin E
Handling	Linear pressure N / cm (kgf / cm) for 130 ° C: 12 (1.2) Gauge pressure kPa (kgf / ㎠): 294 (3.0) Time (seconds): 10 * This pressure display is the linear pressure and gauge pressure of Asahi JR-600.
Brand / Manufacturer	Vilene (JAPAN Vilene)
Registration Date	2/17/2020

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament)* and refers to the weight per 9,000 m. If 9,000 m weighs 1 g, that is 1 denier; if it weighs 50 g, that is 50 denier.
The higher the denier count, the thicker the yarn and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

LE306 Shirt Belt For Low Elongation Corresponding Fusible Interlining Areas

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Product Description

FAQ

General Notes

Reviews

Related Items

Customers who viewed this product also viewed

Items from the same category

More from This Brand or Manufacturer

LE306

Shirt Belt For Low Elongation Corresponding Fusible Interlining Areas