ApparelX is a global B2B marketplace for fabrics and apparel materials.

Multiple shopping bags are now available Details

Welcome to ApparelX. Yes, we now ship to the USA!

›
9520

This item is discontinued.

You can not purchase this item. You can check the successor item information at Description Section or Related Item Section.

9520 PES100% Fusible Interlining Areas For Shirt[Interfacing] Vilene (JAPAN Vilene)

9520

PES100% Fusible Interlining Areas For Shirt

ApparelX ID:1074433

Due to JAPAN Vilene's withdrawal from domestic sales in Japan, new orders have ended, but customers who continue to use our products and need assistance may contact Support. If stock is available, you may be able to place an order.

It is characterized by a soft feel with a slightly bulky texture. Its PES 100% bulky processed yarn base follows the movement of stretch materials.
While offering a soft feel, this interfacing has moldability and moderate resilience.

*If ordering by the roll, enter 100 in the quantity field.

Set roll quantity

*An image of the adhesive side is available on the third image.
*100M per roll
*This product is arranged in roll units.

Brand / Manufacturer:Vilene (JAPAN Vilene)

Supplier:

Stock Status(*):Displayed after account registration

*Excl. tax

Qty.

Ask About This Product

Order Remarks

Add a note for the supplier or for your own reference:

Enter Order Remarks

Product Description

Set roll quantity

*An image of the adhesive side is available on the third image.
*100M per roll
*This product is arranged in roll units.

Category	Interfacing
Style	SHIRT


Specification	Standard: 150 cm x 100 meters Number of points (P / inch): 32 White: 1000
Material	100% polyester% Resin type: Polyamide resin E
Handling	Linear pressure N / cm (kgf / cm) for 140 ° C: 17 (1.7) Gauge pressure kPa (kgf / ㎠): 392 (4.0) Time (seconds): 15 * This pressure display is the linear pressure and gauge pressure of Asahi JR-600.
Brand / Manufacturer	Vilene (JAPAN Vilene)

Share This Item

FAQ

Frequently asked questions about this product:

What are the standard sizes for inside belt interfacing used in men's garments?

33 mm, 38 mm.

What kind of problem is kiratsuki?

It is the phenomenon of resin sparkling through the gaps in the weave of the face fabric.
Materials with a loose weave and dark-colored lightweight fabrics are especially noticeable, so using colored resin will resolve it.

What kind of problem is bleed-through?

A state where adhesive resin seeps through to the outer fabric, impairing the fabric’s hand.
As a solution, choose one with a smaller adhesive resin particle size.

What does the D (denier) in 20D or 30D mean?

Denier is a unit used for filament yarn (continuous filament fiber)*, indicating the weight per 9,000 m. If 9,000 m weighs 1 g, it is 1 denier; if it weighs 50 g, it is 50 denier.
The higher the denier count, the thicker the thread and the heavier the fabric.

What kind of problem is bubbling?

A condition where fine air bubbles appear to be trapped between the outer fabric and interlining. It occurs because the compatibility between the fabric and interlining is poor. It may be resolved by choosing an interlining with vertical and horizontal stretch.

What kind of problem is fading?

It is when the uneven texture of the resin pellets becomes clearly visible on the surface of the outer textile. The solution is to choose interfacing with smaller resin dots.

What is the difference between single-dot and double-dot fusible interlining?

It is a difference in the adhesive coating method.
Single dot is made by solidifying fine powdered adhesive and transferring it in a dotted pattern onto the base fabric.
Because the adhesive is fine, it is less likely to bleed through thin materials and less likely to cause fading.
Double dot has a two-layer structure, with a gel-like adhesive forming the base and powdered adhesive layered on top of it.
It provides strong adhesion for a wide range of materials.

What is the difference between the whites such as KW, OW, W, and Y in fusible interlining colors?

The color notation varies by product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is a whiter, purer white.

How should I choose interfacing?

The appropriate interlining varies depending on the face fabric material, thickness, and area of use, so we cannot give a single answer.
Please contact us via inquiries with the face fabric material, area of use (neckline, body, etc.), and desired hand feel.

If you can provide the face fabric, we can perform an adhesion test. Please request this from Interlining Adhesion Test.
By performing an adhesion test, you can find out in advance things like adhesive strength and changes in appearance.

9520 PES100% Fusible Interlining Areas For Shirt

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Product Description

FAQ

General Notes

Reviews

Related Items

Customers who viewed this product also viewed

Items from the same category

More from This Brand or Manufacturer

9520

PES100% Fusible Interlining Areas For Shirt